9 transducers, centralized, 120 Watts

Product Code ->
PA-1-120-9
GSD-15
9
AMPLIFIER
1
TRANSFORMER
9

Features

Rated power:  240 watts RMS Standby current (DC operation):  051A
Distortion:  < 1% @ 1kHz Fuse T4AL 4A M205 4 x 20mm type
Signal to noise ratio  Line: >70dB Mic: >60dB Power supply:  240V AC or 24V DC
Frequency response  80Hz – 15kHz, +/-3dB Dimensions:  ≈483W x 350D x 133H mm
Mic input sensitivity:  3mV balanced Weight:  18,7kg
Line inputs sensitivity:  300mV Automatic variable speed fan
Phono input sensitivity:  24mV Over current protection
Telephone input  245mV Load short circuit protection
Bass:  10dB @ 100Hz Built-in low pass filter circuit
Treble:  10dB @ 10kHz Output level LED VU meter

 

Channels 1 – 5 are combination XLR / 635mm balanced jack sockets located on the rear panel The XLR are microphone level and the 635mm are line level (tip / ring / sleeve) inputs TELEPHONE INPUT

A telephone paging and music-on-hold input connection is provided via spring terminals on the rear panel Music sources can be from a choice of optional modules that are installed into the front panel slot SLOT FOR OPTIONAL INPUT MODULES

PRIORITY MUTING

MIC 1, CHIME and SIREN have priority over other inputs The muting level can be adjusted via a knob on rear panel

REMOTE CHIME AND SIREN

This is operated by buttons on the front panel which play various tones across the speakers When the spring terminal on the rear panel is shorted, CHIME is activated

FOUR ZONES SPEAKER SELECTOR

Any combination of mono speakers (4 or 8ohm) can be selected via front panel selector switches

PRE OUT

A preamp output socket is provided enabling connection to extra slave amplifiers or a signal processor 24V EMERGENCY OPERATION

The unit will operate from 24V batteries for use in emergency applications Screw terminals provided on the rear AMP SECTION

Translate »